Monday, June 30, 2014

BlackBerry Curve 9300 stack on BlackBerry bootloader

ASALAMUALAIKUM WR WB

Before to the explanation, first i want to say greet to the MOSLEMS all around the world whose doing Fasting in this Rammadhan. Allah Blessing YOU.

This steps could perform for both troubles resolving way.
2. Install latest OS version for BlackBerry Curve 9300, remove VENDOR.XML from C:\Program Files\common files\Research In Motion\AppLoader folder.
3. Restart PC.
4. Attach USB cable to device and PC with no battery mode.
5. By default Desktop Software will run which is a device connected to PC.
6. Desktop Software will find your device but it can't build communication to the device. Stay with no battery mode on device.
 7. Click Update on the new window, because the device has lost the needed files to work fine. Remember there will be nothing can be backup from the device. So on the next window click Get update.
8. Next window warn you what should to do during 'Flashing' then just say Install update and OK.
 9. Stay with no battery mode and let some files to install.
10. Installation will stop for a while when in connecting to JVM. This the time to attach the battery to the device. At least you have 35% charged battery. So it will start again.
11. When see this on Desktop Software that mean 'Flashing' finish and wait the device boot up.
12. Say Close when this window showing up.
13. Now you can pass this step or choose blue light option to see if the Desktop Software finally recognizing your device.
 14. Now your device is on the Desktop Software, all the tasks will light. It means your device is cured.


15. CONGRATULATION !!!!!!!!

wasalamualaikum wr wb

The JANCUKERS TEAM work

Arek NGAJUM IsoIso Ae [ The Fully Fuckin' Headache Lion ]

Monday, June 23, 2014

Problem(s) after Install NokiaCareSuite ForStore 5.3.112.1425

ASALAMUALAIKUM WR WB

Problem(s) after install NokiaCareSuite ForStore 5.3.112.1425
It's happened to me after i've installed NCS ForStore on my PC. I lost everything that was run well before. As NOKIA said that should uninstall first the old version, i did it.
By the build number of it's i was think that this tool is the newest than i used. But i'm completely wrong.
On this build i have only some new drivers and Plugin update not the tools was install.
I lost every app out of the nokia care suite launcher. Even the launcher never found anymore.
Learning what was wrong i found that this build updating some old driver version and give
some new driver for windows 8 phone driver and or Asha and Lumia devices.
Now what should to do are:
Uninstall NokiaCareSuit ForStore 5.3.112.1425, because it doesn't have any app on the installed tool except the drivers, so just remove it first.
Remove/uninstall all new drivers had just installed already. Remove 'em one by one.
If you have third party tool as REVO uninstaller you'll find all new drivers (simply to find what is new include in the installation ). Remove all folders left over exception for phoenix folder.
If you have apps like UFS, JAF, ATF or other corresponding to the nokia tool they'll need that folder.
Folders need to clean out of you pc:
o C:\Program Files\Nokia\Nokia Care Suite
o C:\Program Files\Nokia\Troubleshooting
o C:\Program Files\Nokia\Envira
o C:\Program Files\Nokia\ZuneDrivers
o C:\Program Files\Nokia\Connectivity Cable Driver
o C:\Program Files\Nokia\3806_USB_Driver
o C:\Program Files\Common Files\Nokia\Fuse
o C:\Program Files\Common Files\Nokia\Service Layer
o C:\Program Files\Common Files\Nokia\Tss
o C:\ProgramData\Nokia\Fuse[hidden]
o C:\ProgramData\Nokia\Nokia Care Suite[hidden]
o C:\ProgramData\Nokia\UCM[hidden]
o C:\Users\[username]\AppData\Roaming\Nokia\Nokia Care Suite[hidden]
Restart pc
Re-install NCS PST 5.0.2013_13.4.4
After finishing NCS PST installation next you can install NCS ForStore 5.3.112.1425.
First it will updating and install new drivers to pc. Next it will install NCS, but by the way it will warn that the newer version installed. And it won't install NCS. After installation finish you better restart your pc. And see again what has just installed on programs and features or use REVO Uninstaller to know.
Bellow what will happen on installation process.
After all drivers and plugin ( visual C++ 2012 ) installed, the NCS ForStore will install it's applications. But because you have just installed NCS PST 5.0.2013_13 already, it won't install again because it is the older version. What need to do is clicking OK and FINISH on the next window.
http://haribagibagi.blogspot.com/2014/06/problems-after-install-nokiacaresuite.html
http://haribagibagi.blogspot.com/2014/06/problems-after-install-nokiacaresuite.html
Look at REVO Unistaller or Programs and Features what's new on your system.
http://haribagibagi.blogspot.com/2014/06/problems-after-install-nokiacaresuite.html
Open NOKIA CARE SUITE Launcher and double click Product Support Tool For Store icon.
http://haribagibagi.blogspot.com/2014/06/problems-after-install-nokiacaresuite.html
It works again with all new drivers installed and allow me again to flashing DEAD RM-914 Lumia 520
http://haribagibagi.blogspot.com/2014/06/problems-after-install-nokiacaresuite.html
You can Flashing, Downloading Lumia Firmwares by the tool
ENJOY!!!
wasalamualaikum wr wb
WE ARE THE JANCUKERS

Arek NGAJUM IsoIso Ae [ The Fully Fuckin' Headache Lion ]

Monday, June 16, 2014

NaviFirm+ 3.2 Reborn [ Tested WORK on 06/16/2014 ]

ASALAMUALAIKUM WR WB
NaviFirm+ 3.2 - rewritten from scratch by Marco Bellino - based on EPICBIZNUS idea

NaviFirm+ full features are available to Donors only.
Make a Donation to get immediately a NaviFirm+ account.

Terms and Conditions:
your account (or even the whole service), could be suspended or terminated at any time, without prior notice and without refund.
By donating you accept these Terms.

Features Available to non-donors:
- Search latest firmware version by Product Code
- Add Product Codes to the Favourite List to be notified of new firmware releases

Additional Features Available to donors only:
- Notification of firmware changes since last login.
- Freely browse all the Firmware versions available for any device.
- Download / Copy to ClipBoard, any firmware version.
- Show hidden/replaced/removed variants

*** History ***
3.2 Change-Log:
- New: credentials for public shared account are automatically acquired from server (if available)

DOWNLOAD





MIRRORs:





ENJOY
Thank You

wasalamualaikum wr wb


Arek NGAJUM IsoIso Ae [ The Fully Fuckin' Headache Lion ]

Wednesday, June 11, 2014

Install PhoenixSuit [ AllWinner Flashing Tool ] on Windows

ASALAMUALAIKUM WR WB

Complete step by step how to install PhoenixSuit v1.06 on Windows PC for the beginner as i do. What a little confusing to install this application is the china alphabet that not familiar to me.
Exactly after the app has installed it's default to english language. Hope you have download the tool to your computer. For me this is more convenient to use than using the portable version of  AllWinner LiveSuitPack.
1. Double click PhoenixSuitPacket_v1.06 to start intall the app.
 2. On the next window click Next on the right bottom corner with (N) letter to continue.
 3. Do not make any change to the default configuration, i think it has english by default. If you want to change installation path you can change through changing drive letter C: with D: or something else to your drive you want. Then click next (N).
 4. Next you will prompt to install ANDROID USB Driver, it is easier because it has english. Follow steps to install Google device driver.
 5. If prompt windows security permission please choose Install this driver software anyway to complete the driver installation. And click Finish.
6. After click Finish if you found windows security alert comes again, do the same as above to proceed.
7. Now click Close (C). The installation has complete.
 8. If you're running Windows 8, click desktop and you'll find PhoenixSuit icon there. This icon use to run your application. After finishing the installation you better to restarting the PC so the driver will work fine.
     On Windows 7 you can run the app from Start > All programs > PhoenixSuit > Phoenix Suit.exe or type PhoenixSuit.exe on Search bar.
 Now your app really ready to use for AllWinner CPU base ANDROID Tablets.
 To flashing the device click on anchor icon or Firmware tab, click image to browse the firmware needed and click Upgrade to perform Flashing procedure. Read carefully the notice comes alongside process.
 If you only need to Backup, Wipe or Recovery the device and want to install something to the device you can use Apk tab.
You can do what you want to your China tablets based on AllWinner CPU inside.
THANK YOU

wasalamualaikum wr wb



Arek NGAJUM IsoIso Ae [ The Fully Fuckin' Headache Lion ]